Fitment Information

• Ford Bronco Wildtrack 2-Door / 4-Door 2.7L V6 EcoBoost 4WD (2021, 2022)
  
  • HOSS 2.0 / Bilstein
    
• Ford Bronco Any Model w/ Sasquatch 2-Door / 4-Door 2.7L V6 EcoBoost 4WD (2021, 2022, 2023, 2024, 2025)
  
  • Sasquatch
    
• Ford Bronco Badlands 2-Door / 4-Door 2.7L V6 EcoBoost 4WD (2021, 2022, 2023, 2024, 2025)
  
  • Non Sasquatch
    
• Ford Bronco FIRST EDITION 2-Door / 4-Door 2.7L V6 EcoBoost 4WD (2021, 2022, 2023, 2024, 2025)

Kit Options

• Front & Rear Springs
  • Ride Height: +2.3" Front / +1.6" Rear
  • For use with HOSS 2.0 (Bilstein PSD) and HOSS 3.0 (Fox) Dampers ONLY Exact lift heights may vary depending on exact packages and weight distributions of vehicle
• Front Springs Only - Heavy Duty (150lbs weight on front axle)
  • Ride Height: +0-2.2" Front
  • HD PRO-TRUCK COILOVER Front springs for +150lbs weight on front axle. Inadequate weight may compromise ride quality. EIBACH PRO-TRUCK COILOVER USE ONLY. NOT FOR USE WIH BILSTEIN, FOX, PRO-TRUCK SPORT or FACTORY SHOCKS.
• Front Springs Only - Heavy Duty (250lbs of additional weight over the front axle)
  • Ride Height: +2.3" Front
  • Exact lift heights may vary depending on exact packages and weight distributions of vehicle HD Front Springs meant for 250lbs of additional weight over the front axle. For use with HOSS 2.0 (Bilstein PSD) and HOSS 3.0 (Fox) Dampers ONLY
• Rear Springs Only - Heavy Duty (500lbs weight on rear axle)
  • Ride Height: +1.3-2.7" Rear
  • HD PRO-TRUCK COILOVER Rear springs for +500lbs weight on rear axle. Inadequate weight may compromise ride quality. EIBACH PRO-TRUCK COILOVER USE ONLY. NOT FOR USE WIH BILSTEIN, FOX, PRO-TRUCK SPORT or FACTORY SHOCKS.
• Rear Springs Only - Heavt Duty (500lbs extra weight)
  • Ride Height: +1.8" Rear
  • Exact lift heights may vary depending on exact packages and weight distributions of vehicle Rear springs only, heights listed are with 500lbs extra weight. Only recommended to run at fully load height, too much lift will cause poor ride quality. For use with HOSS 2.0 (Bilstein PSD) and HOSS 3.0 (Fox) Dampers ONLY

Product Description 

Built upon decades of offroad racing victory, the Eibach PRO-TRUCK-LIFT combines a series of Pro-Lift-Kit springs and Pro-Truck Sport shocks to create a perfectly tuned suspension system engineered for both, on and off-road performance. Each PRO-TRUCK-LIFT is designed and tested to deliver maximum ride height without compromising the integrity of factory bushings, ball joints and other components.

For vehicles with front coil-over-shock suspension, height adjustable spring perch grooves allow for fine tuning of the vehicles€™ ride height. As winches, armor and accessories are added, this system maintains proper ride height allowing for more clearance and full use of available shock travel.

With the same spring technology found in our ERO offroad race springs, the block resistant Pro-lift-kit springs can be taken to the limit mile after mile ensuring consistent performance and ride height. Matched with our heavy duty Pro-Truck Sport shock system, this combination is capable of handling anything in its path. Precision shock valving allows compliance over large obstacles and control through rough terrain while also improving on road comfort and performance.

Five-Year Warranty

Eibach's 5 Year Warranty covers products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light duty (class 1-3) trucks under normal use and operating conditions.