Morimoto Tail Lights Corvette C7 (2014-2019) C8 Style LED - Red or Smoked Lens
Fitment Information
- Chevrolet Corvette C7 Stingray Coupe and Convertible (2014, 2015, 2016, 2017, 2018, 2019) US spec models only
- Chevrolet Corvette C7 Z06 Coupe and Convertible (2015, 2016, 2017, 2018, 2019) US spec models only
- Chevrolet Corvette C7 Grand Sport Coupe and Convertible (2017, 2018, 2019) US spec models only
- Chevrolet Corvette C7 ZR1 Coupe (2019) US spec models only
Fitment Note: US-spec models only. These housings have been designed and tested on US-spec C7 Corvettes. Compatibility on international or Canadian-spec vehicles may vary and is not guaranteed by Morimoto. Fits all C7 body styles including coupe and convertible across all trim levels: Stingray, Z06, Grand Sport, and ZR1.
Specs & Features
- OEM Plus: The Morimoto XB Tail Lights are the perfect solution to update the rear end of your C7 Corvette with a more modern, but undeniably Vette-inspired style.
- Plug n Play: Connects directly to original wire harness for full functionality, with no modifications required.
- Unbeatably Bright: Brake light, reverse light, and amber LED turn signal thanks to modern TIR and reflector-based LED optics.
- Back up Boost: Optional Back up light bar will plug n play and boosts output in reverse by over 300%!
- No Compromise: Co-developed, tested and distributed by Morimoto here in the USA, produced using the best materials & backed with a five-year warranty.
- The turn signal function can be configured during installation to operate in either standard on/off flash mode or sequential mode.
- The C8-Style light pipe across each housing functions as a low-intensity parking light and a high-intensity brake light.
- New outer air-exhaust trim pieces are included in the kit, replacing the factory trim surrounds as part of the installation.
- An optional backup light bar is available separately from Morimoto and connects to the factory reverse light circuit for over 300% more output in reverse.
- No resistors, modules, or adapters are required.
- Sold as a pair covering the driver and passenger sides.
- Installation should not take more than one to two hours.
- Backed by Morimoto's 5-year limited warranty, valid only when purchased from an authorized Morimoto dealer such as Redline360.
Pairs well with:
- Borla Axleback Exhaust Corvette C7 Stingray (2014-2019) S-Type or ATAK with NPP Valves A Borla axleback exhaust to complement the tail light upgrade as part of a complete rear-end refresh on the C7, pairing a modernized C8-inspired look with an improved V8 exhaust note.
- aFe Momentum Cold Air Intake Corvette C7 6.2L V8 (2014-2019) Dry or Oiled Filter A cold air intake upgrade to complement the C7 build alongside the new tail lights. Dyno proven at 18 whp and 22 ft-lb torque gain on the 6.2L LT1.
Product Description
Our new C8-Style Smoked XB LED tail lights for the C7 Corvette hit the nail on the head when it comes to quality, performance, and a modernized look. These are a direct bolt-on fitment for all Chevrolet Corvettes from 2014-2019 including the coupe and convertible. They use all the stock mounting points, include brand-new outer air-exhaust trim pieces, and should not take more than an hour or two to install. The C8-Style light pipes that dominate each housing acts as a low intensity parking light, a high intensity brake light (red). Above that, the reflectors operate as LED turn signals which can run in either a standard on/off flashing mode or a sequential setup, which is easy to change during installation. One of those two reflectors doubles as the white reverse light, which is also plug n play with your factory reverse light circuit. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are backed with an industry-leading five year warranty.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Morimoto Tail Lights Corvette C7 (2014-2019) C8 Style LED - Red or Smoked Lens
Morimoto Tail Lights Corvette C7 (2014-2019) C8 Style LED - Red or Smoked Lens
Fitment Information
- Chevrolet Corvette C7 Stingray Coupe and Convertible (2014, 2015, 2016, 2017, 2018, 2019) US spec models only
- Chevrolet Corvette C7 Z06 Coupe and Convertible (2015, 2016, 2017, 2018, 2019) US spec models only
- Chevrolet Corvette C7 Grand Sport Coupe and Convertible (2017, 2018, 2019) US spec models only
- Chevrolet Corvette C7 ZR1 Coupe (2019) US spec models only
Fitment Note: US-spec models only. These housings have been designed and tested on US-spec C7 Corvettes. Compatibility on international or Canadian-spec vehicles may vary and is not guaranteed by Morimoto. Fits all C7 body styles including coupe and convertible across all trim levels: Stingray, Z06, Grand Sport, and ZR1.
Specs & Features
- OEM Plus: The Morimoto XB Tail Lights are the perfect solution to update the rear end of your C7 Corvette with a more modern, but undeniably Vette-inspired style.
- Plug n Play: Connects directly to original wire harness for full functionality, with no modifications required.
- Unbeatably Bright: Brake light, reverse light, and amber LED turn signal thanks to modern TIR and reflector-based LED optics.
- Back up Boost: Optional Back up light bar will plug n play and boosts output in reverse by over 300%!
- No Compromise: Co-developed, tested and distributed by Morimoto here in the USA, produced using the best materials & backed with a five-year warranty.
- The turn signal function can be configured during installation to operate in either standard on/off flash mode or sequential mode.
- The C8-Style light pipe across each housing functions as a low-intensity parking light and a high-intensity brake light.
- New outer air-exhaust trim pieces are included in the kit, replacing the factory trim surrounds as part of the installation.
- An optional backup light bar is available separately from Morimoto and connects to the factory reverse light circuit for over 300% more output in reverse.
- No resistors, modules, or adapters are required.
- Sold as a pair covering the driver and passenger sides.
- Installation should not take more than one to two hours.
- Backed by Morimoto's 5-year limited warranty, valid only when purchased from an authorized Morimoto dealer such as Redline360.
Pairs well with:
- Borla Axleback Exhaust Corvette C7 Stingray (2014-2019) S-Type or ATAK with NPP Valves A Borla axleback exhaust to complement the tail light upgrade as part of a complete rear-end refresh on the C7, pairing a modernized C8-inspired look with an improved V8 exhaust note.
- aFe Momentum Cold Air Intake Corvette C7 6.2L V8 (2014-2019) Dry or Oiled Filter A cold air intake upgrade to complement the C7 build alongside the new tail lights. Dyno proven at 18 whp and 22 ft-lb torque gain on the 6.2L LT1.
Product Description
Our new C8-Style Smoked XB LED tail lights for the C7 Corvette hit the nail on the head when it comes to quality, performance, and a modernized look. These are a direct bolt-on fitment for all Chevrolet Corvettes from 2014-2019 including the coupe and convertible. They use all the stock mounting points, include brand-new outer air-exhaust trim pieces, and should not take more than an hour or two to install. The C8-Style light pipes that dominate each housing acts as a low intensity parking light, a high intensity brake light (red). Above that, the reflectors operate as LED turn signals which can run in either a standard on/off flashing mode or a sequential setup, which is easy to change during installation. One of those two reflectors doubles as the white reverse light, which is also plug n play with your factory reverse light circuit. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are backed with an industry-leading five year warranty.
Original: $694.00
-70%$694.00
$208.20Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fitment Information
- Chevrolet Corvette C7 Stingray Coupe and Convertible (2014, 2015, 2016, 2017, 2018, 2019) US spec models only
- Chevrolet Corvette C7 Z06 Coupe and Convertible (2015, 2016, 2017, 2018, 2019) US spec models only
- Chevrolet Corvette C7 Grand Sport Coupe and Convertible (2017, 2018, 2019) US spec models only
- Chevrolet Corvette C7 ZR1 Coupe (2019) US spec models only
Fitment Note: US-spec models only. These housings have been designed and tested on US-spec C7 Corvettes. Compatibility on international or Canadian-spec vehicles may vary and is not guaranteed by Morimoto. Fits all C7 body styles including coupe and convertible across all trim levels: Stingray, Z06, Grand Sport, and ZR1.
Specs & Features
- OEM Plus: The Morimoto XB Tail Lights are the perfect solution to update the rear end of your C7 Corvette with a more modern, but undeniably Vette-inspired style.
- Plug n Play: Connects directly to original wire harness for full functionality, with no modifications required.
- Unbeatably Bright: Brake light, reverse light, and amber LED turn signal thanks to modern TIR and reflector-based LED optics.
- Back up Boost: Optional Back up light bar will plug n play and boosts output in reverse by over 300%!
- No Compromise: Co-developed, tested and distributed by Morimoto here in the USA, produced using the best materials & backed with a five-year warranty.
- The turn signal function can be configured during installation to operate in either standard on/off flash mode or sequential mode.
- The C8-Style light pipe across each housing functions as a low-intensity parking light and a high-intensity brake light.
- New outer air-exhaust trim pieces are included in the kit, replacing the factory trim surrounds as part of the installation.
- An optional backup light bar is available separately from Morimoto and connects to the factory reverse light circuit for over 300% more output in reverse.
- No resistors, modules, or adapters are required.
- Sold as a pair covering the driver and passenger sides.
- Installation should not take more than one to two hours.
- Backed by Morimoto's 5-year limited warranty, valid only when purchased from an authorized Morimoto dealer such as Redline360.
Pairs well with:
- Borla Axleback Exhaust Corvette C7 Stingray (2014-2019) S-Type or ATAK with NPP Valves A Borla axleback exhaust to complement the tail light upgrade as part of a complete rear-end refresh on the C7, pairing a modernized C8-inspired look with an improved V8 exhaust note.
- aFe Momentum Cold Air Intake Corvette C7 6.2L V8 (2014-2019) Dry or Oiled Filter A cold air intake upgrade to complement the C7 build alongside the new tail lights. Dyno proven at 18 whp and 22 ft-lb torque gain on the 6.2L LT1.
Product Description
Our new C8-Style Smoked XB LED tail lights for the C7 Corvette hit the nail on the head when it comes to quality, performance, and a modernized look. These are a direct bolt-on fitment for all Chevrolet Corvettes from 2014-2019 including the coupe and convertible. They use all the stock mounting points, include brand-new outer air-exhaust trim pieces, and should not take more than an hour or two to install. The C8-Style light pipes that dominate each housing acts as a low intensity parking light, a high intensity brake light (red). Above that, the reflectors operate as LED turn signals which can run in either a standard on/off flashing mode or a sequential setup, which is easy to change during installation. One of those two reflectors doubles as the white reverse light, which is also plug n play with your factory reverse light circuit. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are backed with an industry-leading five year warranty.
