Banks Power Charge Pipe Kit for RAM 2500 / 3500 6.7L Cummins (2019-2022) Cold & Hot Side Boost Tubes 26006
Fitment Information
- RAM 2500 / 3500 6.7L Cummins (2019, 2020, 2021, 2022)
Emissions Compliance
- This product is covered by CARB Executive Order D-161-159 and is legal for use in all 50 states, including California. It does not affect factory emissions systems when installed as intended.
Specs & Features
-
3.5" High-Flow Charge Pipes – Larger diameter for maximum airflow and reduced restriction
-
+68% Hot Side Flow Increase – Massive improvement over stock 2.7" piping
-
+24% Cold Side Flow Increase – Better airflow compared to factory 3.15" tubes
-
Constant Diameter Design – Maintains consistent 3.5" flow for better boost efficiency
-
Mandrel-Bent Steel Tubing – Smooth bends reduce turbulence and pressure loss
-
Faster Turbo Spool – Improved airflow helps the turbo respond quicker
-
5-Ply Silicone Couplers – Heavy-duty connections that handle boost without failure
-
Constant Tension Clamps – Keeps everything sealed tight under pressure
-
Powder-Coated Finish – Corrosion-resistant for long-term durability
- Stronger Than Stock – Replaces weak factory plastic components with steel construction
Product Description
Factory charge pipes are one of those hidden bottlenecks most people don’t notice until they upgrade. They’re smaller, restrictive, and in some cases even use plastic sections that aren’t built for long-term boost pressure. This Banks Power charge pipe kit fixes all of that by stepping up to a full 3.5-inch constant diameter system with smooth mandrel bends that keep airflow moving clean and consistent. The result is less pressure loss, quicker turbo spool, and more usable power without having to push the system harder than it needs to.
Banks didn’t just make it bigger—they made it stronger and more efficient across the board. The steel construction holds up better over time, while the 5-ply silicone couplers and constant tension clamps keep everything sealed under boost. By improving airflow and reducing restriction, your engine doesn’t have to work as hard to hit boost targets, which helps with efficiency and heat management. Whether you're running a stock setup or planning future upgrades, this kit gives you the airflow headroom to support it.
Redline360 sells only genuine and authentic Banks Power products.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Banks Power Charge Pipe Kit for RAM 2500 / 3500 6.7L Cummins (2019-2022) Cold & Hot Side Boost Tubes 26006
Banks Power Charge Pipe Kit for RAM 2500 / 3500 6.7L Cummins (2019-2022) Cold & Hot Side Boost Tubes 26006
Fitment Information
- RAM 2500 / 3500 6.7L Cummins (2019, 2020, 2021, 2022)
Emissions Compliance
- This product is covered by CARB Executive Order D-161-159 and is legal for use in all 50 states, including California. It does not affect factory emissions systems when installed as intended.
Specs & Features
-
3.5" High-Flow Charge Pipes – Larger diameter for maximum airflow and reduced restriction
-
+68% Hot Side Flow Increase – Massive improvement over stock 2.7" piping
-
+24% Cold Side Flow Increase – Better airflow compared to factory 3.15" tubes
-
Constant Diameter Design – Maintains consistent 3.5" flow for better boost efficiency
-
Mandrel-Bent Steel Tubing – Smooth bends reduce turbulence and pressure loss
-
Faster Turbo Spool – Improved airflow helps the turbo respond quicker
-
5-Ply Silicone Couplers – Heavy-duty connections that handle boost without failure
-
Constant Tension Clamps – Keeps everything sealed tight under pressure
-
Powder-Coated Finish – Corrosion-resistant for long-term durability
- Stronger Than Stock – Replaces weak factory plastic components with steel construction
Product Description
Factory charge pipes are one of those hidden bottlenecks most people don’t notice until they upgrade. They’re smaller, restrictive, and in some cases even use plastic sections that aren’t built for long-term boost pressure. This Banks Power charge pipe kit fixes all of that by stepping up to a full 3.5-inch constant diameter system with smooth mandrel bends that keep airflow moving clean and consistent. The result is less pressure loss, quicker turbo spool, and more usable power without having to push the system harder than it needs to.
Banks didn’t just make it bigger—they made it stronger and more efficient across the board. The steel construction holds up better over time, while the 5-ply silicone couplers and constant tension clamps keep everything sealed under boost. By improving airflow and reducing restriction, your engine doesn’t have to work as hard to hit boost targets, which helps with efficiency and heat management. Whether you're running a stock setup or planning future upgrades, this kit gives you the airflow headroom to support it.
Redline360 sells only genuine and authentic Banks Power products.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fitment Information
- RAM 2500 / 3500 6.7L Cummins (2019, 2020, 2021, 2022)
Emissions Compliance
- This product is covered by CARB Executive Order D-161-159 and is legal for use in all 50 states, including California. It does not affect factory emissions systems when installed as intended.
Specs & Features
-
3.5" High-Flow Charge Pipes – Larger diameter for maximum airflow and reduced restriction
-
+68% Hot Side Flow Increase – Massive improvement over stock 2.7" piping
-
+24% Cold Side Flow Increase – Better airflow compared to factory 3.15" tubes
-
Constant Diameter Design – Maintains consistent 3.5" flow for better boost efficiency
-
Mandrel-Bent Steel Tubing – Smooth bends reduce turbulence and pressure loss
-
Faster Turbo Spool – Improved airflow helps the turbo respond quicker
-
5-Ply Silicone Couplers – Heavy-duty connections that handle boost without failure
-
Constant Tension Clamps – Keeps everything sealed tight under pressure
-
Powder-Coated Finish – Corrosion-resistant for long-term durability
- Stronger Than Stock – Replaces weak factory plastic components with steel construction
Product Description
Factory charge pipes are one of those hidden bottlenecks most people don’t notice until they upgrade. They’re smaller, restrictive, and in some cases even use plastic sections that aren’t built for long-term boost pressure. This Banks Power charge pipe kit fixes all of that by stepping up to a full 3.5-inch constant diameter system with smooth mandrel bends that keep airflow moving clean and consistent. The result is less pressure loss, quicker turbo spool, and more usable power without having to push the system harder than it needs to.
Banks didn’t just make it bigger—they made it stronger and more efficient across the board. The steel construction holds up better over time, while the 5-ply silicone couplers and constant tension clamps keep everything sealed under boost. By improving airflow and reducing restriction, your engine doesn’t have to work as hard to hit boost targets, which helps with efficiency and heat management. Whether you're running a stock setup or planning future upgrades, this kit gives you the airflow headroom to support it.
Redline360 sells only genuine and authentic Banks Power products.
